Old Man Emu Nitrocharger
shocks are developed by ARB USA for specific vehicle applications. These
shocks host a variety of features that makes them such a great choice
for your vehicle.
Polyurethane bushings
18mm induction hardened and hard chromed steel piston rod that creates
a super fine finish to reduce friction and increase seal life.
Triple lip seal unique to nitrocharger which offers excellent gas and
oil retention via the self lubricating seal lips, while the third wiper
positively stops the ingress of dirt and moisture.
1.6mm steel stone guard protects piston rod and seal from rocks and
debris.
Teflon coated bushing in the rod guide allows smooth, low friction operation,
dramatically reducing heat build-up and wear.
Low pressure nitrogen gas minimizes aeration and cavitation, the cause
of fade. Gas pressure assists replenishment of oil from the reserve
tube to the pressure tube during the rebound stroke. At slow piston
speeds the low pressure gas allows softer valving fir greater ride comfort.
Twin tube design which allows for a greater volume of oil.
35mm x 20mm teflon banded piston which incorporates the Nitrochargers
four stage sliding intake rebound valve to control vehicle bounce.
Sliding compression valve designed to prevent violent bottoming out
and loss of control.
Supplementary welds at the top and bottom mounting ferrule or pin for
added strength and safety.
Must
specify make, model and year of truck/suv in comments section of checkout.
Please state any preferences and lift size on vehicle.
OME 1 (one) only CALL
OME4
Set of Four CALL
Extreme Duty mono-tube shock for Jeeps and full-size trucks are developed
and tuned specifically for each application to deliver maximum control
while not comprimising ride quality, high speed stability and comfort
for those extended trips over the toughest terrain.
Specifically calibrated and tested for each vehicle
Mono-tube design provides excellent heat dissipation resulting in dependable
performance under all conditions
Large 46mm sintered metal velocity-sensitive piston for more consistent
performance
Nitro steel piston rods, won't chip or peel like chrome rods
Viton seal and low friction piston rod bearing for long life
Available with remote reservoir
Fully serviceable, tunable
Polyurethane bushings are more responsive
Durable powder coated finish resists scratches
Robotic welds for greater consistencey
Manufactured in the USA with a lifetime warranty
Must
specify make, model and year of truck/suv in comments section of checkout.
Please state any preferences and lift size on vehicle.
MONOTUBE
1 (one) only $69.99
MOMTUBE4
Set of Four $269.99
MOMTUBEW/RES
1 (one) only $189.99
MOMTUBE4W/RESF
Set of Four $499.99 Front Shocks have Resevoir rear are non-resevoir
pictured above.
MOMTUBE4W/RES
Set of Four $699.99 Front and Rear have Resevoirs
To order by credit card, check/money order online or by fax click
here.
Call or email for shipping rates to CANADA, HI, AK, FPO, AP or International.
All shipping rates are to lower US
48 states only.
